Product Description
Screen Printing Mesh Glue, used for bonding mesh and aluminum frame. stainless steel or wood screen frame with high adhesive strength.
In screen making, should be removed clean sticky glue stir thoroughly before using. Every time the aluminum frames should use the fine sandpaper friction, and then wipe the stain with a solvent , and pre-coated adhesive surface in the frames, and stretch mesh, coating glue to dry.
When you are stretching mesh, clean the surface of the screen frame to ensure complete penetration of the glue into the mesh , between the mesh and the frame to ensure good contact , before the cutting wire mesh stick glue to ensure thorough drying, the mesh is sufficiently bonded to the screen frame.
Need to coat screen adhesive evenly on the four sides of frame evenly. The adhesive should be even and proper but not too thick.
Usage method:
Step 1: Mix the adhesive and curing agent as 5:1 (in order to ensure stability, the curing agent should be
quickly shaken up and down more than ten times),The deployed mesh glue takes 200g as an example, and
the operation time is about 1 hour,If you need to increase the operation time, add diluent after the glue
and curing agent are prepared,It is recommended to add a maximum of 40%,This operation time can be
as long as 4-6 hours,Glue that is not used for the time being should be placed in a place that is away from
the sun and wind.
Step 2: Pull the mesh to the specified tension,Make sure the mesh frame fits the mesh tightly,After the
net drawing is completed, the net drawing machine can be loosened only after it is parked for a suitable
time until it is cured.
Step 3: Place 9-12 hours after the screen is collected,Follow normal pre-print mode:For example, after
cleaning with water and applying photosensitive glue, it must be baked in the oven (recommended oven
temperature maximum 55, minimum 45). Using the screen version of this product, the higher the
temperature into the oven and the longer the time, the stronger the resistance to the common washing
water solvent on the market. The use of solvent-based washing water, whether manual or automatic
cleaning machine can easily cope.
Matters need attention:
A: Make sure the mixing container is clean and dry. Shake the curing agent up and down a dozen times before use.
B: Ensure that the ratio of 5:1 glue to hardener is correct. Make sure the glue and curing agent are evenly mixed and in place. The prepared glue is used up in about 1 hour, if it is necessary to extend the operation time to 4-6 hours in the original 1 hour or so, after the glue and curing agent are dissolved, the diluent is transferred according to the above proportion and then stirred evenly.
C: Unblended main glue. The curing agent is immediately sealed and stored.
Packaging & Shipping
Main glue 750ml+ curing agent 150ml =900ml/ set;
Main glue + curing agent=1kg/set
Main glue : curing agent=5:1
15 sets/box.
Product Catalog
Company Profile
Anhui Qianghua Screen Mesh Co., Ltd (Shenzhen Field Import&Export Co.,Ltd) is one of the manufacturer specialized in screen mesh, we have rich production experience, our company specializing in the production of various kinds of printing and dyeing,slik screen printing mesh,mesh adhesive,ghost remover,frames,Squeegee and so on.
Our Exhibition
Samples can be sent you free to your shipping agent in China ! First test sample, then order !
BECAUSE OF TRUST, SO BUSINESS IS SIMPLE !
Audited Supplier 
){kind=link}